Authorized Sodatide Retailer1 capsule a day – 30 per bottle60-day money-back guaranteeLot SOD-26/SO-2885
Supplement facts

Sodatide Supplement Facts: Every Label Line Typed Out

Written and checked by the Sodatide Editorial DeskRevised 8 min read
Quick answer

The Sodatide label lists 1 capsule per serving and 30 servings per container.

Each capsule holds 211 mg chicory root inulin, 100 mg potato resistant starch and a 36 mg blend of three probiotic strains. The CFU count and per-strain amounts are not printed.

What each one does is on the ingredients page.

The label

What does the full Sodatide label look like?

One wrap label, three panels, and every line matters.

Full Sodatide label with suggested use, caution, distributor and the Supplement Facts panel
The whole Sodatide wrap label, laid flat. Left panel: use, storage, caution and distributor. Center: brand name, three claims and the 30-capsule count. Right: the Supplement Facts panel and the FDA statement.

The Sodatide label has three panels. The left one covers how to use and store the capsules. The center shows the brand, the three claims and the bottle size. The right one holds the Supplement Facts box.

Every fact on this site comes from this label. Below, each line is typed out in plain text so you can read it on a phone without zooming.

Supplement Facts

Sodatide Supplement Facts panel, typed out line by line

Three active lines, one footnote, and a list of other ingredients.

The Sodatide Supplement Facts box, copied word for word

Label lineAmount per serving% Daily Value
Serving Size1 Capsule–
Servings Per Container30–
Chicory Root Inulin (Cichorium intybus) (root)211 mg†
Potato [Resistant Starch] (tuber)100 mg†
Probiotic Blend: Bifidobacterium infantis, Clostridium butyricum, Akkermansia muciniphila36 mg†
† Daily Value Not Established––

The two lines printed just below the Supplement Facts box

LineExact wording
Other IngredientsHypromellose (vegetarian capsule), microcrystalline cellulose, magnesium stearate, silica.
FDA statementThese statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.

Add the three amounts and you get 347 mg of active ingredients per capsule. The panel does not list calories, sugar or sodium, because the amounts are too small to count.

For what each ingredient does, see the Sodatide ingredients guide.

Full transcription

What do the other lines on the Sodatide label say?

The left and center panels, typed out exactly as printed.

Top line
Advanced Metabolic Science
Main claim
Metabolic & Digestive Support
Icon claims
Metabolic & Digestive Support · Supports Appetite Control and Satiety · Promotes Energy Production From Fats
Bottle size
30 Capsules · Dietary Supplement · 30-Day Supply
Suggested use
As a dietary supplement, take one (1) capsule daily with an 8 oz. glass of water. Refrigerate for optimal quality.
Storage (label)
Keep away from heat, light, and humidity to preserve freshness.
Caution
Do not exceed recommended dose · Pregnant or nursing mothers, children under the age of 18 and individuals with a known medical condition should consult a physician before using this or any dietary supplement.
Warnings
KEEP OUT OF THE REACH OF CHILDREN · DO NOT USE IF SAFETY SEAL IS DAMAGED OR MISSING · STORE IN A COOL, DRY PLACE
Distributed by
Instituto Experience, Lakeland FL, 33804, then a phone number and an email address
Origin
Made in the USA with globally sourced ingredients

The caution line names three groups who should talk to a physician first: pregnant or nursing mothers, children under 18, and anyone with a known medical condition. It also repeats the dose rule. One capsule is the most the label allows in a day.

The warning block is printed in capital letters. It covers child safety, the safety seal and storage. Check the safety seal the first time you open each bottle.

Label skills

How do you read a supplement facts panel?

Six checks that work on any supplement bottle, not only this one.

  1. Start with the serving size

    Every amount below it is per serving. Here that is 1 capsule, so the numbers are per capsule, not per bottle.

  2. Check servings per container

    This tells you how long a bottle lasts. Thirty servings at one a day is a 30-day supply.

  3. Read each amount per serving

    Look for a weight next to every ingredient. Sodatide lists 211 mg, 100 mg and 36 mg.

  4. Look at the % Daily Value column

    A number shows how much of a daily target you get. A dagger means no target exists for that item.

  5. Find any blends

    A blend shows one total weight for several ingredients. You learn what is inside, but not how much of each.

  6. Read the other ingredients

    This line lists the shell, fillers and flow agents. It is where allergens and animal products would show up.

The FDA sets the layout for this box, so every supplement in the U.S. uses the same format. Once you can read one, you can compare any two products side by side.

Blends explained

What does “proprietary blend” mean on the Sodatide label?

One total weight, three names, and no split between them.

A proprietary blend is a group of ingredients listed under one total weight. The law lets brands keep the split private. They must still list every ingredient in the blend, from most to least by weight.

On the Sodatide label, the probiotic blend weighs 36 mg. The three strains are listed in this order: Bifidobacterium infantis, Clostridium butyricum, Akkermansia muciniphila. If the brand followed the usual rule, B. infantis is the largest share and Akkermansia is the smallest. The label does not confirm that.

Weight is also a poor way to measure probiotics. A milligram of powder can hold very few or very many live cells. That depends on the strain, how the powder was made and how it was stored. This is why most probiotic labels print a CFU count.

Closer look

Which details does the Sodatide label leave out?

Six details the label leaves out. We mark each one plainly.

Details a careful buyer may want that the Sodatide label does not show

DetailStatusWhy it matters
CFU count of the probiotic blendNot publishedThe usual way to measure live bacteria
Amount of each strainNot publishedStudies test single strains at set doses
Strain codes (for example B. infantis 35624)Not publishedResearch results are tied to specific strains
Live or pasteurized AkkermansiaNot publishedThe main human trial found the clearest results with the pasteurized form
Factory name and addressNot publishedThe label names a distributor only
Independent lab certificateNot publishedLot SOD-26/SO-2885 and CoA SOD-2885-26-SO are reference numbers, not test results

None of these gaps makes the product unsafe. They do make it harder to judge how strong the probiotic part is. If you want to check a bottle's lot number, the batch check page explains what the numbers mean and what they do not prove.

Fact check

Sodatide label vs. marketing: what is different?

Ads can say almost anything. The label has to follow the rules.

Common marketing lines about Sodatide next to what the bottle actually prints

You may seeWhat the label actually says
“Baking soda” in ads and headlinesNo baking soda on the label. Two fibers and a probiotic blend are the only actives.
“FDA approved”The label says its statements have not been evaluated by the FDA. Supplements are not FDA approved.
Weight-loss numbers such as pounds per monthNo weight claim. The three claims are metabolic and digestive support, appetite control and satiety, and energy production from fats.
“Doctor formulated” sealNo doctor is named anywhere on the label.
“Registered facility” sealDescribes where a product is made. It is not a product approval.
“Billions of probiotics”No CFU count is printed. Only the 36 mg blend weight appears.
“Take 2 for faster results”The label says one capsule a day and do not exceed the recommended dose.

When an ad and the label disagree, trust the label. It is the one document a brand must stand behind. The Sodatide reviews page covers more of the claims found online.

The fine print

Why do the Sodatide asterisks and FDA statement matter?

The small type in the corner changes how to read the big type in the center.

Row of five seals: GMP certified, made in an FDA registered facility, natural ingredients, made in the USA, non-GMO
The seal row supplied with the product. These seals describe manufacturing, not approval of the formula.

Each of the three claims ends with an asterisk. The asterisk points to the FDA statement in the bottom right corner of the label.

That statement is required on supplements that make structure or function claims. It tells you the FDA has not checked whether the claims are true. It also says the product is not meant to diagnose, treat, cure or prevent any disease (FDA).

The FDA does not approve supplements before they reach stores. Makers must use registered facilities and follow good manufacturing rules. The seals refer to those rules.

So read every claim as a general statement about support, not a promise. The Sodatide benefits page goes through each claim and the research behind it.

Reader questions

Sodatide label questions

What is the serving size of Sodatide?

The serving size is 1 capsule. Each bottle has 30 servings, so one bottle lasts 30 days at the label dose.

What does the dagger (†) in the Sodatide % Daily Value column mean?

The dagger means a Daily Value has not been established. The FDA sets Daily Values for nutrients such as vitamin C or fiber in general, but not for inulin, resistant starch or probiotic blends. So the % column stays blank.

What does “proprietary blend” mean on the Sodatide label?

It means the brand lists the total weight of a group of ingredients but not the amount of each one. On this label, the probiotic blend weighs 36 mg in total. How that splits between the three strains is not published.

Is there a CFU count on the Sodatide label?

No. The panel lists the probiotic blend by weight in milligrams. It does not list colony forming units, which is the usual way to count live bacteria. We mark it as not published.

Who makes Sodatide?

The label names a distributor, Instituto Experience in Lakeland, Florida. It does not name the factory. The label says the product is made in the USA with globally sourced ingredients.

Does the label say Sodatide is FDA approved?

No. The label carries the standard statement that its claims have not been evaluated by the FDA. No dietary supplement gets FDA approval before it goes on sale.

What should I do if the safety seal on my bottle is broken?

Do not use it. According to the label, a damaged or missing safety seal means the bottle should not be used. Call the order desk with your order ID and a photo of the seal.

Where can I see the Sodatide label myself?

The full label image sits at the top of this page. You can also read it on any bottle you receive. If the two ever differ, the bottle in your hand is the one to follow.

Ready to try Sodatide?

Order from the U.S. authorized merchant, keep your order email, and you are covered by the 60-day money-back guarantee. Questions first? The contact page has the order line and both inboxes.

Three bottles of Sodatide with a free shipping badge
Sodatide30 capsules · 1 a day · 60-day money-back guarantee
Add To Cart